최근 트윗에서 리플 CTODavid Schwartz는 자신의 허브가 Rippled v2에서 실행되고 있음을 표시했습니다. 6. 2 문제가 보고되지 않았습니다. 리플 CTO가 제공한 이 정보는 허브의 용도를 묻는 X 사용자의 질문을 촉발했습니다.
이 질문에 대해 Schwartz는 XRP Ledger에서 허브를 운영하기로 선택한 세 가지 이유를 설명했습니다. 첫째, 그는 몇 년 동안 XRPL 인프라를 실행하지 않았으며 다시 시작하면 좋겠다고 생각했습니다.
여기에는 몇 가지 목적이 있습니다. 1) 몇 년 동안 XRPL 인프라를 실행하지 않았으며 다시 시작하면 좋겠다고 생각했습니다. 2) 일부 검증인 사이에 대기 시간이 증가하는 경우가 있었고, 좋은 메가허브 하나가 네트워크를 의미 있게 줄일 수 있다고 생각했습니다…
둘째, 일부 검증인 사이에 대기 시간이 증가한 사례가 있었으며, 그는 하나의 좋은 메가허브가 네트워크 대기 시간과 네트워크 직경을 의미 있게 줄이고 신뢰성을 높일 수 있다고 믿습니다.
셋째, 일부 경우에는 XRPL이 기대한 만큼 성능을 발휘하지 못하는 국지적인 문제가 있었고, 그는 이러한 문제의 원인이 무엇인지에 대해 자신의 이론을 테스트할 허브가 필요했습니다.
8월에 리플 CTODavid Schwartzunveiled는 UNL 검증자 전용 허브, XRPL 애플리케이션을 실행하는 기타 허브 및 서버를 계획하고 있습니다. 이는 단일 서버로서 단일 허브에 의존하여 최대 가동 시간과 안정성을 목표로 하는 프로덕션 서비스로 작동합니다.
네트워크 동작과 성능을 이해하기 위해 데이터를 수집했으며, 이를 정당화하는 매우 특이한 상황이 아닌 한 파괴적인 테스트는 수행되지 않습니다.
허브의 발표와 출시는 리플 CTO가 올해 말까지 자신의 역할에서 사임을 발표하기 몇 주 전에 이루어졌습니다. 지난 9월 슈워츠는 XRP 커뮤니티에서 계속 활동하면서 "명예 CTO"가 되기 위해 일상 업무에서 물러날 것이라고 말했다. XRP Ledger의 핵심 설계자인 Schwartz는 XRP와 관련된 가족 및 개인 프로젝트에 집중하기로 전환했다고 발표했습니다.
Schwartz는 출력 데이터를 게시하고 Ripple이 중점을 두는 것 외에 XRP의 다른 사용 사례를 연구하면서 XRP 노드를 가동하면서 XRP 커뮤니티를 떠나지 않을 것이라고 말했습니다.
리플 CTO는 XRP Ledger에 대한 현재 활동을 즐기고 있다고 말했습니다. "손을 더럽히고, 건축업자와 이야기하고, 순수한 사랑을 위해 코딩하는 일을 다시 할 수 있게 되어 정말 기쁩니다. "
원문 제목: Why Ripple's CTO Doubling Down on XRP Ledger, Three Key Drivers
In a recent tweet,Ripple CTODavid Schwartz indicated that his hub had been running on rippled v2.
6.
2 with no issues reported.
This information from the Ripple CTO prompted a question from an X user who asked what the hub was for.
Responding to this question,Schwartzoutlined three reasons why he chose to run a hub on XRP Ledger.
First, he hadn't been running any XRPL infrastructure for a few years and thought it would be cool to start again.
It has a few purposes:1) I hadn't been running any XRPL infrastructure for a few years and thought it would be cool to start again.
2) There had been some instances of increased latency between some validators, and I thought one good megahub could meaningfully reduce network….
Second, there had been some instances of increased latency between some validators, and he believes that one good megahub could meaningfully reduce network latency and network diameter and increase reliability.
Third, there were some localized issues with XRPL not performing as well as expected in some cases, and he needed a hub to test his theories for what might be causing these issues.
In August, Ripple CTODavid Schwartzunveiled plans for a hub dedicated to UNL validators, other hubs and servers running XRPL applications.
This, as a single server, would operate as a production service aiming for maximum uptime and reliability, relying on a single hub.
Data gathered from it to understand network behavior and performance, and no disruptive testing would be done unless there were very unusual circumstances justifying it.
The announcement of the hub and its launch came weeks before the Ripple CTO announced resignation from his role by the end of this year.
In September, Schwartz said he was stepping back from daily duties to become "CTO emeritus" while remaining active in the XRP community.
Schwartz, a key architect of XRP Ledger, announced his transition to focus on family and personal projects related to XRP.
Schwartz said he wasn't going away from the XRP community as he spun up his XRP node while publishing its output data and researching other use cases for XRP besides what Ripple is focused on and more.
The Ripple CTO said he enjoys his current activity onXRP Ledger: "Getting my hands dirty, talking to builders, coding for the pure love of it and I’m really excited to get back to that.
".